Tricolor Car LED headlight bulb 6500K 4300K 4700K

How does 3 color LED headlight work?

The principle of the three-color LED light. The LED chip emits light when it conducts in one direction, and does not emit light when it conducts in the opposite direction. Therefore, the two legs are welded with 2 color beads in the front and back directions. The forward conduction lights up a chip. It emits light of one color, and the other chip emits light of another color by reverse conduction.

Stepless dimming means that the brightness of the lamp can be adjusted from 0.5 watts to the maximum wattage of the lamp at will. It is a gradual effect, without gear restrictions, and you can control it freely. You can choose the brightness you want, and the light color is from white to warm light.

What are the 3 lights in a headlight?

1. Look at the kind of LED lights, one comes with a segment controller, and the other doesn't. All with one switch. Turn it on once, it's gear 1, turn it off immediately and turn it on again, it's gear 2, and turn it off and on again, it's gear 3.

2. Three-color light: It can adjust three light colors, that is, white light/natural light/warm light, that is to say, there are three fixed gears, and the wattage is fixed.

3. Stepless dimming: the brightness of the lamp can be adjusted freely from 0.5 watts to the maximum wattage of the lamp. It is a gradual effect, without gear restrictions, and you can control it freely. The light can be adjusted at will, and you can choose your own comfortable color as you like.

4. Three-color segmentation means that the color of the light is segmented through the switch. There is no remote control, and the switch is used to control. Press the switch to change a light color, press the switch for the first time to turn on the white light, press the switch for the second time to turn on the neutral light (white light is 50%+yellow light is 50%), press the switch for the third time to turn on the yellow light.

Is the car led headlight tricolor light necessary?

Monochrome is generally made of blue LEDs and yellow phosphors. The process is simple and the cost is low. Once the color temperature is made, it is fixed and cannot be adjusted. The three-color LED is mixed with three primary colors, and the light is much more pleasing to the eye than the single-color LED. And it can be adjusted later, if you want cool and warm colors, you can adjust it, but the cost is relatively high, and three-color lights are still necessary.

How Monochrome Lights Become Tricolor？

You can adjust the order of the three-color lights by adjusting the power cord, first disassemble the inside of the LED light, and then swap the bright white and yellow power cords, so that the color of the three-color lights can be changed, At the same time, it can also meet the needs of switching power.
When adjusting the order of the three-color lamps, be careful to cut off the power first to prevent electric shock, and when testing the lamps, be careful not to touch the surface of the lamps directly with your hands to avoid being injured by the heat of the lamps.

80W bright car headlight LED headlight
1. Each set of power supply: 40W/piece (80W/set)
2. Lumen: 6500LM
3. Fan: double ball
4. LED color: white
5. LED type: Sanan 3570 lamp beads, three colors
6. Color temperature: 6000K white light, golden light 3000K 4300K warm white light
7. Life expectancy over 50,000 hours
8. Heat dissipation: aviation aluminum 6063
9. Voltage: 12-100V universal for large and small trucks
10. Lighting angle: 360°
11. Waterproof grade: IP67
12. Color temperature: 6000-6500K
13. Working life: more than 50,000 hours (10 times the brightness of xenon bulbs; 100 times the brightness of halogen bulbs)
14. Model: H1 H7 H8 H11 9005 9006