Chip Power : 150W/Pair, Fit 12V Car Lumen : 30000LM/Set Chips Type : CSP3570 NO Error Design: All In One Design With Cooling Fan With canbus function SystemLifespan: >50000hrs Design: All In One Design With Cooling Fan Heat Dissipation Theory : Aviation aluminum 6063 The actual power is 90% of the theoretical power Car Suitable Models: 90% of models on the market
How to install led headlight bulb
1. Applicable models Car LED headlights are suitable for various types of cars, including sedans, SUVs, MPVs, trucks, etc. Different models may require different models of LED headlights, such as H1, H3, H4, H7, H11, etc., to ensure compatibility with the vehicle's lamp interface and electrical system
2. Remove the old headlight Open the hood: Open the hood and secure it with a support rod to ensure safety. Locate the headlight assembly: Find the rear of the headlight assembly, which is where the old bulb is installed. Remove the dust cover: Many vehicles have a dust cover on the headlight assembly, unscrew the dust cover to access the bulb. Disconnect the wire connector: Carefully unplug the wire connector connected to the back of the bulb. Remove the old bulb: Turn the bulb counterclockwise and gently pull out the bulb, dispose of the old bulb properly.
3. Install the new LED bulb Check the LED bulb: Make sure the new LED bulb is compatible with the vehicle and is not damaged. Insert the LED bulb: Align the base of the LED bulb with the lamp holder, insert the lamp holder and turn it clockwise to secure. Reconnect the wires: Connect the wire connector to the back of the LED bulb, making sure the connection is secure. Reinstall the dust cover: If the vehicle has a dust cover, reinstall it to protect the assembly from dust and moisture.
4. Test the LED headlights Reconnect the battery: Reconnect the car battery and tighten the battery terminals. Turn on the headlights: Turn on the headlights and make sure the LED bulbs are working properly. Check the high and low beams. Adjust the beam angle: If necessary, adjust the beam angle of the headlights to ensure that the beam is properly aligned to avoid glare.
5. Make sure everything is secure Check all connections: Make sure all connections are secure and the headlight assembly is securely installed.
Installation Tips
Handle the bulb carefully: Always wear gloves and avoid touching the surface of the LED bulb, as oils from your skin may damage the bulb. Choose high-quality bulbs: Invest in a well-known brand of LED headlights to ensure durability and performance.(High-quality LED headlight products usually pass various quality certifications, such as ECE certification, DOT certification, etc. These certifications indicate that the products meet relevant safety and performance standards.) Use an anti-flicker module: Some vehicles may require an anti-flicker module or resistor to prevent electrical interference. Check local regulations: Make sure the LED headlights meet local regulations regarding brightness and color temperature.
Common Problems and Solutions
Bulb flickering: Install a CAN bus decoder or anti-flicker module to resolve compatibility issues with the vehicle's electrical system. Incorrect beam pattern: Adjust the headlight alignment to ensure the beam is properly aligned. Difficulty accessing the headlight assembly: Refer to the vehicle manual for specific instructions, or seek professional help.
